SIÊU THỊ THIẾT BỊ ĐO QUANG MINH - CÔNG TY TNHH ĐẦU TƯ VÀ TT QUANG MINH
ĐT: 04.3873.0880 - Hotline: 090.400.3848 - Fax: 04.3873.0880
Email: kd@sieuthithietbido.com - Website: www.sieuthithietbido.com - www.sieuthithietbidienmay.net

 

BẢNG BÁO GIÁ
Thiết bị nhận dạng ngắt mạch -

Ngày báo giá: 29/03/2024   

 

Kính gửi:

 

Công ty:

 

Địa chỉ:

 

Email:

 

Điện thoại:

 

Fax

 

SIÊU THỊ THIẾT BỊ ĐO QUANG MINH xin gửi tới Quý Khách Hàng báo giá sản phẩm của chúng tôi:

Tên hàng

Thông tin chi tiết

Đơn giá


Thiết bị nhận dạng ngắt mạch (Circuit Breaker) SEW 188 FFF
 
 FINDING CIRCUIT BREAKER
 Use the tip of the Sniffer to scan the circuit breakers. Please note that the Sniffer is designed to be held vertically for the vertical circuit breakers and horizontally for the horizontal circuit breakers.
 MAKE SURE ALL THE CIRCUIT BREAKERS ARE ON
 For example, start scanning from the top left row, then go down etc.
 But you can scan the breakers in any order. While you are scanning, observe the bar-graph and listen to the buzzer.
 FINDING EARTH FAULT
 To find an earth fault or the trace faulty wire, you must connect the transmitter in serie with the fault. For example, if you have a short between Line and Earth, but you don't know where the short is.
 Connect the Transmitter, using and adaptor, in series, in the line. If the Protection device trips, then you will have to bypass the protection device for the duration of this test. Use the optional leads for this use.
 The 188FFF is a Fuse and Fault Finder which comprises of two parts : The Receiver and the Transmitter
 The Transitter draws a current from the mains supply circuit to whcih it is connected to the Signal Current from the Tx is at about 10 kHz. The Transmitter is powered by the mains and requires no batteries
 The 10kHz signal current generated by the Transmitter is then searched (sniffed) by the Receiver to detect the Fuse, Circuit Breaker or the faulty circuit
 The Receiver is a tuned circuit which has it's center frequency tuned to about 10kHz. The sensor is located in the tip of the Receiver
 The amplitude of the received signal is shown on a bar-graph type LEDs
 The more LEDs ON, the stronger the signal. The Receiver uses on 9V battery
0 VND

Ghi chú:
- Thuế: Giá trên chưa bao gồm thuế giá trị gia tăng (VAT).
- Hình ảnh có thể không hoàn toàn chính xác với hình ảnh thực tế của sản phẩm.

Giao hàng:
- Trong nội thành trong vòng 2-6 tiếng trong giờ hành chính đối với các mặt hàng có sẵn, trừ trường hợp đối với hàng phải đặt hàng.
- Ngoài ra hàng hóa tới từng địa phương phụ thuộc vào thời gian vận chuyển hàng hóa từ kho hàng gần nhất tới nơi nhận hàng.

Phương thức thanh toán:
* Tiền mặt hoặc chuyển khoản ngay sau khi giao hàng.

Thông tin liên hệ

SIÊU THỊ THIẾT BỊ ĐO QUANG MINH - CÔNG TY TNHH ĐẦU TƯ VÀ TT QUANG MINH
ĐT: 04.3873.0880 - Hotline: 090.400.3848 - Fax: 04.3873.0880
Email: kd@sieuthithietbido.com - Website: www.sieuthithietbido.com - www.sieuthithietbidienmay.net