Siêu thị thiết bị đo (0) sản phẩm
Trang chủ Nhà sản xuất Báo giá tổng hợp Giới thiệu công ty Liên hệ
Danh mục sản phẩm
Thống kê
» Số ngành hàng: 413
» Tổng số SP: 1834
» Tổng lượt xem: 16249969

Hãng sản xuất: SEW - Đài Loan

 Model: PD-40AM

 Meets IEC/EN 61010-1, IEC/EN 61010-2-031

 PD-40AM is a high voltage probe meter. It measures positive polarity DC voltages up to 40kV.
 It consists of 2 kinds of contact tips, a meter, a test clip for the ground and a high qualify enclosure.
 The enclosure has very good insulation properties. It is lighweight and rugged. Two kinds of contact tips are available. One is a round needle tip for normal use. Another is a special flat spring type for CRT anode.
 PD-40AM is typically used to measure high voltages in TV sets, power supplies and instruments in laborartories. Before taking any measurements, first connect the alligator clip of this probe to earth ground and make sure connection is proper.
SPECIFICATIONS
 
Input Impedance 600M Ohm.
Attenuation Ratio 40000 : 1
Accuracy DCV (0 ~ 20kV) +/- 2%, DCV (20kV ~ 40kV) +/- 3%
Max. Working Voltage DC 40kV
Operating Temperature 0 degree C ~ 50 degree C
Storage Temperature -10 degree C ~ 60 degree C
Cable Length 1 m
Weight Approx. 400g
Note For Positive Polarity only not for microwave ovens

 

Sản phẩm khác
← BACK
 
↑ TOP
Hỗ trợ trực tuyến
Giỏ hàng của bạn
Trang chủ Hướng dẫn đặt hàng Hướng dẫn thanh toán Vận chuyển và giao hàng Chính sách bảo hành Sơ đồ đường đi Tuyển dụng Liên hệ

SIÊU THỊ THIẾT BỊ ĐO QUANG MINH - CÔNG TY TNHH ĐẦU TƯ VÀ TT QUANG MINH
ĐT: 04.3873.0880 - Hotline: 090.400.3848 - Fax: 04.3873.0880
Email: kd@sieuthithietbido.com - Website: www.sieuthithietbido.com - www.sieuthithietbidienmay.net

Tay đo cao áp SEW PD-40AM (DC 40kV), Tay đo cao áp SEW Tay đo cao áp SEW PD-40AM (DC 40kV), Tay đo cao áp SEW By Siêu thị thiết bị điện máy Quang Minh: nhà cung cấp Tay đo cao áp SEW PD-40AM (DC 40kV), Que đo cao áp SEW Chính hãng Giá rẻ nhất - Gọi ngay 04.3873.0880 - 090.400.3848 5 sao trên 1806 khách hàng bình chọn